I had a birthday recently, I spent that weekend painting the BMW. At the end of the day, my Dad’s only disappointment was the hacked up rear mudguard and how rubbish it looked. So as a present he offered to buy me a good second hand one. So moments later I ordered the BMW brake light from Motorworks and a more paint from Craig at Buzzweld because the mudguard we found was, of course, the wrong colour.
The guard eventually turned up and as I had to take some Holiday during this COVID-19 stuff I thought oh well might as well do something with the time.
A quick scrub down and I masked off the stickers and the BMW logo. Then out with the paint. I chose to go red again as it covers well compared to the white. and I thought I like to be different.
Then came time to fit, oh how much of a pain that was. It decided to interfere with the Metal Mule Pannier kit, and so, therefore, got a few scuffs in the new paint. I will touch that up another day. I took the opportunity while the mudguard was off to paint some Coo-Var Rust Converter as I do plan to repaint the frame one day but not just now, but I would like to prevent it getting any worse anytime soon.
Looks a lot nicer with the proper guard in place and I have got rid of the horrible bracket for the numberplate. Decided to fit the new brake light so the LED one I made had to be removed.
The indicator bracket I made up one afternoon looks like it needs to be removed and something else made. The Resistors for the Indicators also needs to move now. I am thinking under the seat on a new mount.
One of the other things I have been meaning to do is sort the Screen mounting points but I can’t seem to get the BMW bolts which are M6 with a 10mm spigot on top with an M5 tapped into that. I asked a friend if he could have a go so “This Old Hoddy” made up a few, they are interesting as he is still learning his lathe and Mill. I needed 4 but he had only made 2 that could be used.
But he told be he had ordered some hexagonal bar stock and would be having another go. A week later and he had done them, I collected on the way home from work kept distancing rules etc I even left them on a bag for a few more days before taking them out for a clean etc.
Technically they should look like this,
With a 17mm spanner head on them etc etc. But they fit and look right and they are mostly hidden. As the ones Hoddy made for me were plain steel I had to treat them. The idea of Cold Bluing them sounded like a good idea. Its a technique used on Guns to give them a layer of dark blue rust that can be oiled and precents the red rust we are all used to. Ordered a bottle and gave it a go, as I did this I asked some of the Ixies on Ixion and they were strongly against it but it was too late I had done it.
Doesn’t look too bad, if it doesn’t work I will take them off and either spray them or get them treated. I am trying to avoid buy a DIY Zinc plating kit but I am getting weaker by the day.
Fitting the screen etc was rather easier than before as I now had the right sized bolts and wasn’t faffing about.
You might also noticed I fitted the head light surround, using some more of the 3M double sided tape. With the evening starting to draw in I decided to give the headlight grill I found at the bike show a bit of a spruce up.
I went for white to go against the red. Now she has pretty white teeth to smile at others as she goes by. Maybe then people wont stare at her saggy pistons (she isn’t a MV).
For ages, I have had a squeal on the Land Rover. I made the mistake of asking on the forums etc. Which is never a good idea as you always have people quoting the most expensive item to fix. I decided to let it develop so that I could finally be able to hear it easily and know that it was.
Hmm, they look like standard bearings, a quick call to Frome Bearings and Belts LTD and they have them in stock. Less than £20 and I had the bearings, admittedly it should be 6303LHA and I fitted 6303LLU but it will do. The only info I can find is HA is case hardened outers but not sure how that is going to make a difference.
I started to tap the bearings out but soon the shed dwelling parent turned up and using some random old sockets and a number 2 hammer managed to convince the old bearings to leave and move in the new ones. I refitted and now the Land Rover it quieter, for now. I may need to give the Land Rover a wash now.
The Easter Bank Holiday weekend loomed and that would give me 4 days of OK weather to try and get the bike into a tidier condition. I started Friday morning and started to strip her down.
There was some rather crappy looking bolts in there top part of the tank, even a self taping screw stuffed in for good measure. The knee pads were stuck on with some silicone and needed to be refitted.
That also meant I had to drain the fuel out of the bike. I had run out of fuel a few days earlier and had put some 15ltrs in and rode it to work and back etc. (with COVID-19 this is how I get any chance to ride). I attached a bit of pipe to the taps and let it drain.
I got most of the fuel out but the condition of the fuel at the bottom of the tank wasn’t great. I have cleaned the taps etc once before.
Now with the bike totally naked, I did contemplate sending the picture into Bike Exif but I have been informed the lack of exhaust wrap, the correct sized tyres, and I had handlebars meant I lost enough points and they wouldn’t use it.
After emptying all the fuel out I took a good look at the tank and paid more attention to some of the repairs done to the underside of the tank. I think its been repaired with fibreglass and as much as I wanted to pick at the stuff and see how bad it is I left it alone. I will keep an eye out for a replacement tank I see HPN do a 45ltr version, 10 extra than the standard BMW so that would be tempting.
Now the ahem “Fun” part. Prepping the stuff ready to paint. This took the rest of the day and most of the second day. Not helped by the condition of the paint especially the white, now I believe the tank has been re-sprayed at some point and that paint had a nasty reaction to something and had developed a texture akin to elephant skin. This is mostly the reason why I wanted to paint the bike as the texture meant I could never get it clean.
It had been suggested to me that I would be the best idea to paint the white bits first so I masked it off and set about it using a paint I purchased from Buzzweld called PIO (Plastics in One) which is a self-etching paint for going onto plastic materials. I hope it has enough flex to cope with the plastic tank. Craig (the owner) had mixed me up a can of Traffic Red and Traffic White which are RAL colours so has less of a mixture of tints so a stronger final colour. I will admit my prep work wasn’t the best and there was plenty of bits I missed but I was starting to get really tired of sanding stuff by now.
The white isn’t very good at coverage so it requires quite a few layers, this lead to the inevitable impatient me and runs. So some parts might need looking at in the future but for now, it looks OK from a distance. I left everything to cure for the evening, so that I could get to work on the red bits on Sunday morning.
Sunday was a special day for it was Easter and my Birthday. But the forecast was for Thunder and rain by the afternoon so work had to start early.
Thankfully the red is better at covering than the white and it went down nicely. This red is more of an orange-red than a blood-red but it is still nice. Due to a little mess up, I ended up with Satin Smooth for the Red paint so its a bit more of a matt finish but it still looks nice and I like it.
While I was at it I thought I would give the knee pads a spruce up with the Plastics in One paint.
Then I looked at the seat,
So I painted it as well. According to Buzzweld it should be fine for vinyl etc so its worth a shot just to get it looking tidier.
Took only two or 3 coats but a improvement.
Now to begin reassembling. I had removed a lot of the sticky crap that was holding the knee pads on and had masked the area so that I had a good surface the get into. Being a snob I had opted for 3M products to stick stuff back on as I know the stuff they have works.
As you can see from the tail edge there is a little bit showing. This will be touched up at a later date once I get some more red paint. I then looked at where the BMW badge goes, much to my annoyance its silicone and not many glues like to stick to that, I am not sure that is original fit but I can’t seem to get it off the bike, I have tried some RTV silicone stuff to stick the roundels on and will see if that holds.
Starting to look more like it now. I am pleased how a bit of fresh paint on the knee pads just gives it a new shine. At this point I gave up for it was my Birthday and there was a BBQ in my honor and I am not the kind of man to miss that.
Monday morning arrives and I start Re-assembling the bike.
First the Side Panels went on,
Then the Bra and Front Mudguard,
I am taking the opportunity to replace some of the bolts and nuts etc. mostly because I can. Now the Tank goes on.
Followed by the seat and the top storage box cover.
While fitting the cover I again replaced quite a few nuts and bolts, because I disliked some of the self tappers, scrivets etc.
I plan to make some sort of tray to go at the bottom to prevent stuff from getting wet at the bottom. Even maybe adding a liner of sorts in there. I have ordered a new seal for the lid as I do have a bit of rubber that came off but it looks tired.
Now comes a bit that I wasn’t really looking forward to but I know it needed to be done. Stickers. The bike didn’t have any other than a bit of faded pinstripe tape to hide the seam. I bought a kit from heritagestickers.eu for the ’91 bikes as I preferred the Paris-Dakar before the lawyers got there and stopped BMW from using the words and they went to PD.
Sadly no real instructions of how to fit these, but I did find a OK picture of a bike on the net. I promtly went outside and stuck on the first one,
I just wetted the back of the sticker with some soapy water to allow for placement. The wind was very keen today so no point in getting the hair dryer out to get them warmed up.
I then did the pin stripes. That was a pain to get right, it is a very curvy tank. I used a small gas powered soldering iron with its end used for heating heat shrink to get it to bend to the angles and to get it to dry enough to stick.
Now for the big stickers, oh my what a swear inducing effort that can be, thankfully I managed to just drink lots of tea while attempting to ignore the wind that wanted to help me with this part. Much like the paint job its not perfect, but hopefully its Fit From Far Away.
I have got some tape to go over the top of the tank but I am reluctant to do it as I will have to cut it to go around the hold for the covers lock. Fuel taps etc to be refitted after they have been cleaned. Oh, and a new rear mudguard has been ordered so that it can be finished and looks pretty. The screen will go back on once my friend “This Old Hoddy” finishes making some bolts as I can’t seem to find any place that has the BMW ones. Sorry for the long length of this post but it’s been a busy weekend where I have managed to tick off one of those little jobs I have wanted to do since I got the bike. Below the difference a year makes.
Well, I am still working for the moment so I only have weekends to work on the bike. But with this nice weather, I need to get out on the bike. So it will go to work with me. So I started to reassemble the front end.
I had ordered the parts for mounting this all nice a neatly but not all the bits are available even though many websites still list them. But the spacers I do have I have now fitted and it does make for a neater fitting. I also got rid of the LED bulb and fitted a nice Osram Night Breaker. Though it will need some adjustment, which I can do thanks to my previous efforts.
I have a shield thinggy for the headlight but no idea of how it fits. But I have ordered some 3M double-sided tape to give it a try.
Once back in home I finally got my roundtoit and looked at cutting the bits for mounting the indicators.
It took a bit of trial and error getting them to be just big enough to cover the outer hole diameter. Then the cutting was a bit of a pain as the bed on the laser isn’t quite aligned and therefore it has areas that cut better than others. But I got it in the end. Tomorrow evenings task is to fit them back on the bike.
Hopefully the bank holiday weekend is nice and I can try and get the tank and side panels painted.
I have ordered parts to put the dash back together but after 2 firms failed to have them in stock even though the listed them as in stock on their websites I have ended up ordering some of the bits from America so it may take some time.
In the meantime, I am mostly plodding along with bits to do. One of which was to swap out the bulbs in the clocks to LED. Its a theme with me. The pictures where taken with fixed exposure mode so they should so comparable brightness.
Now I had ordered Green LED bulbs as that is quite good for your night vision but being a dumbass I ordered 1 rather than 2, it took over a month to arrive so I wasn’t too worried about ordering another. I then bought some Osram LED ones in white and they do look nice. The power-saving is again quite a bit, yes my Desk is a mess.
Btw in case you didn’t see it, I managed to find the original grill for the headlight for the bike at the Classic Bike Autojumble near home for £3.
Back to fettling, on removing the clocks some of the wires for the Rev Counter got damaged and until I figure out the connectors BMW used back then I just went for the cheap option of a 3 way Delphi Superseal Connector, they are cheap and fairly waterproof.
With that done I turned my eyes to an irritation I have had for a while. namely the seat bracket. When I got the bike the seat was loose but there was a bracket there. I looked to see if I could buy the genuine BMW parts but it seems I am missing bits from the seat so therefore no locking seat for me. The bracket on there annoys me as the two screws don’t actually bite into the plastic so are going to fall out at some point. I, therefore, ordered some of these,
I do like to collect lots of random stuff, as my boss says “you are a magpie”. These are more for the 3D printing fans but I thought I could press them into the plastic and then use the thread as a way to prevent it from getting chewed up by self-tapping screws.
It was a simple task of cleaning the hole up with a drill, then tapping in with a hammer, using the bolt to make it a little easier. I did try to heat the insert up with a solder gun but that didn’t work. But the hammer them in trick did ok. I then tried to use an old cable tie and the solder gun to weld it in, didn’t do much other than move plastic about. So I used some glue to give some strength and some washers to help spread the load. Some M5 bolts were then used to hold it in place, I took a few extra mins to give it a quick dusting with paint to finish it off. It isn’t a stressed part of the bike but I would like to stay in place. Time will tell if my bodge of a bodge will hold.
Well, Lucas didn’t deliver the parts but I did end up with quite a few of them from a few firms. With the search to solve the issue of the bike stopping after a few miles, I wanted to get a new coil, points and a new condenser (spring for the auto-advance/retard just because). While I was ordering this I had planned on making a new wiring loom but by the time you take in for the connects and wire the project was going to be rather costly, I had got a quote of ~£80 for a new loom but while I was looking for the coil I spotted I could buy a genuine loom from Lucas for £35 so I did.
I still plan to make my own loom just because I can but I now have the old loom to go on as a basis for the new one. It isn’t a very complicated bike so I set to dismantling the bike. The weather is sunny but its cold and that wind is even colder but I still set about it, working from the front to back. I did like things like an extra red wire in the loom which I have taken to mean it is there is an extra earth wire from the headlight area to the battery. Remember it is Positive earth on this bike.
I will keep the coil in the battery box area and I extended the wires for that. I am looking to fit a modern regulator/rectifier and that meant chopping the new loom to fit different connectors. I got most of the way but I was finding the wind was getting me rather cold and I was starting to drop bits and get grouchy. So I stopped, it is not like I will be going very far on the bike for a bit due to the COVID-19 restrictions.
This pause in work will allow me to think about how I plan to wire the battery into the bike. Plus anything else that pops into my head in the meantime.
I have been doing a few local short trips to build confidence with the bike and to run it in. If it was to break down it would be near to home and save me being stuck out in the sticks miles from home. These rides have gone well and I have enjoyed getting to ride the bike again. My friends have already started to queue up to take a ride on it and my usual rule of you need to be able to start it before you can ride it.
But while I wait for them to get their kickstart skills in place I had the opportunity to be able to ride it to work. The ride isn’t far but should only take 20mins, I gave myself 30mins. I needed all 30 of those minutes to get there. There I was happily riding along and then it started to slow, I was taking it steady as its still a new piston etc. Then fear came in and I pulled the clutch in, the bike came to slow and steady rest near a driveway and it isn’t easy to put your left arm out when you have your left hand holding the clutch in. I was a little upset with myself for this but at looking at the ammeter I noted it was way over into the negative side. I turned the lights off and wandered around the bike and tried to start it again, it started easily and I did notice the engine wasn’t super hot just nice and warm. I got my kit on and made it another 2 or 3 miles before it packed in again, pull over wait a few mins, start and continue. I would like to say I took photographs of this but I wasn’t really in the mood for it just then. I got to work with moments to spare. The ride home had another 2 enforced stops. This meant I was a little grumpy on Friday evening. The thought was I had seized it a few times or I had Electrical Pixies leaking somewhere.
Saturday morning dawns and I head off to the VMCC Autojumble at the Bath & West Showground armed with a mental list of things to buy. Also, strict instructions not to panic-buy any more motorcycles. For this was the show where I ended up buying the BMW R100GS PD.
While at the show I did come away with a new rectifier & fuel taps for the Matchless (or AJS). I didn’t find a Valve Spring Compressor for the AMC heads, it looks like I will have to make my own. Though the find of the day came on the last few stalls, out of the corner of my eye I spotted some very distinctive paint, could it be, yes it was.
This is just a light grill and I was planning of making one with the laser. But at £2 for what the breakers want to charge £40 for I was rather happy that I spent the £3 getting into the autojumble.
After my excitement of the Autojumble I went out to inspect the bike and upon inspecting the bike I remembered one of the issues being the bike doesn’t seem to be charging, hence my purchase of a reg/rec for the bike so I guess it might be a pixie leak. Plus brake light doesn’t seem to work now, but headlights and rear light do. I took off the seat and looked around for any issues, I had found a wire loose from the horn and thought I might test that, oddly both connectors on the horn have power when I ground the chassis (positive earth) and disconnecting the wire I had fitted there caused the horn to fail so I put that back together. Now it was time to probe the rectifier, I start the bike and probe away, No voltage except for the 6V from the battery. No power is getting there. I check the leads out of the alternator and they are fine. Then I happened on a chance sighting of a bit of light, a spark! Hmm, and I looked in and saw.
Its a crap video I know. This is the coil, I had moved it because my Dad didn’t like it under the tank as it makes it a pain to get the tank on. Well, it was shorting to the chassis. I wrapped some nice thick rubber around it.
I started it again and now I get 4V AC on either side of the rectifier and 7 DC on the output. Problem solved, I hope. I didn’t fit the fuel taps as the petrol leak as stopped for now, but I have the taps ready just in case it gets worse.
After far too long the bike is now back on the road. Saturday was spent doing a few things to the bike such as not fitting a regulator/rectifier as I bought one with a Dynamo bike and I have an Alternator bike. Not to worry as that part will get used on the AJS once I get around to getting that to work.
One of the jobs was to finish off the failed attempt at drilling and tapping a nut, I visited my Uncle who is a dab hand at welding etc with some replacement nuts and the tank. Just ran a tap down the thread which has seemed to have done the task of taking it to a 5/16″ x 22tpi BSF thread even though it was 5/16″ x 26tpi Bicycle thread that has had an M8 bolt stuffed into it at some point. I may have to revisit this one day but I think that will be once I have learnt to weld.
The above picture shows the correct setup for the mounting of the tank. Since I have had the bike we have never managed this due to various bodges that others had done to this bike before we got it and the lack of correctly sized bolts. Now thanks to an AJS/Matchless owners club in Denmark all the manuals and data for the bikes are in an archive online, http://archives.jampot.dk/. I was able to find out the correct mounting solution, order the bits. Though I did have to ask another person on the owners club about what size bolt it was. 1.1/4″ Long 5/16″ x 26tpi Cycle Thread, I have cheated a little and gone for BSF just to make getting bolts a tag bit easier. But I am keen to remove any Metric stuff from the bike, its an old bike and should have the correct bolts for it. Anyway, I digress. The tank took a bit of fiddle and levering to fit and now it is on and good.
With the fuel tank on I needed to get the fuel pips back on, a good part of the time was spent looking for the 3 way adapter we had for the bike and was put away in a safe place for when we got to working again.
Posh clips used because I could, the pip is in hot water to help get it onto things.
Then it was time for the important things, such as improving aerodynamics. So this item was removed to give me extra HP.
Oh and this fell out of the exhaust pipe,
By the time I had done all this, it was dark and cold. So I had to wait until Sunday to go for a ride. You may also notice a new Genuine Lucas rear brake light lens.
As you can see the gear lever is set to trials mode and will need adjustment.
Sunday and I robbed some fuel out of the BMW and put a litre or two into the Matchless. I started it fairly easily and warmed it up and took it for a quick ride around the block. Where it coughed and spluttered along until I pulled over and remembered this bike never liked the choke. Then I rode home and waited for it to cool down. Took this time to give the bike some extra air in the tyres and also a Polish using a Dirty Oily Rag.
This amused some on the Social Media saying aren’t you worried about Oil getting on your clothes or damaging the paint.
Nope, not worried about damaging the paint in the slightest. As for getting oil onto your kit, well its a classic bike it is bound to leak some fluids. Currently, it seems happy to leak fuel from the taps on the tank. These have cork in them and that has a habit of going dry so needs a bit of time to soak and swell with some fuel, I hope.
It then rained and prevented any more rides for a bit. I am trying to do short rides to bed in the new piston and to check everything is on where it should be and I won’t have it blow up miles from home. Thankfully it dried out enough I could go for another ride. So I went and visited my Gran and stopped for a picture on the way home.
Next weekend is the classic bike show where I bought the BMW. Let us hope I don’t panic buy myself another motorbike while there.
The BMW headlight I found is at a strange angle and it needs adjustment. I suspect in a previous life it is been crashed. Now as I have the head in bits this a good time to try and fix a few things. Now I did try and order replacement parts online but a company offering the parts and having them available on their website for ordering turned around and said sorry we don’t have the bits. The left me the option of refit and ignore the headlight that is pointing the wrong way or try and fix it myself.
Headlight removed after a bit of hacksawing and you can see the two bolts, they are meant to rotate, but they don’t. Placing the bolt in the vice and twisting just twisted the bolts. This meant I had to drill them out, I tried the pillar drill but drill bit would wander so I got the hand drill out and did it myself.
It is not pretty but I meant it could rotate the bolt out. To prevent this happening again I decided that I could use an M5 wire insert (yeah I like them) with a A2 stainless bolt.
Then I turned to the headlight and the plastic cups at that end, it was a pain to get out but good use of pliers and it worked.
Only for me to see the next problem, the bolt heads,
Yup they are rounded, grr. A quick measure suggested about 7mm. This meant I had to take off quite a bit of material from A2 Stainless.
With the aid of the bench grinder, I started to do it by hand, that was too slow so I fitted the bolt to the drill and set to it. The first bolt was nice and easy.
Did the second, and got overexcited,
But I tried another bolt, I had spares. Got it to work fine. Though I suspect I will be in trouble with the proper engineers at my abuse to the stone on the grinder.
With a bit of faffing, I soon refitted the bolts. The BMW used a thumbwheel that sat on two flats ground into the bolt. This often means the thumbwheel falls off. I had purchased some nylon wing nuts as at the time of buying bits I wasn’t sure how the headlight adjustment worked as everything was rusted in place. With the extra know-how after taking it apart, I need to find a way to lock the wing nut in place so I can use it to adjust the light. So a Flange Nut (with serrated edge) and a nylock nut have been used to lock it into place.
Another small task that kept my happy in the shed for a few hours.
The Matchless now runs but as with all things, there is always more to do. I wanted to get the bike on the road and take it for a ride but there was a few things annoying me. The worse being the fuel tank mounting.
Since I got the bike all those years ago the removal and refitting of the tank have always been a task. I even bought the correct bits for it which just didn’t come close. A few questions asked on the owners club forum and I was informed the correct bolt is a 5/16″ x 26tpi Cycle Thread bolt of 1.1/4″ in length.
The threads into the tank mounting have been damaged and other bolts have been forced in. I plan to drill, tap and use a wire insert (aka Helicoil) a 5/16″ x 22tpi BSF because I have some inserts leftover from the cylinder head work I did a few weeks ago.
I managed to tap the top nut with ease and that made me feel good, even if the swarf from the drilling did cut up my hands a bit. As I found out the next morning when I did the washing up in rather hot water. But back to it, the lower nut for some reason would not drill, I have tried sharpening drill bits, using other ones etc but no luck. Rather than get overly annoyed I have decided to order some 5/16″ nuts with the mindset of just griding these off and then visiting my Uncle Jamie to see if he will weld new nuts on for me (c’mon I have only just upgraded to an Angry Grinder – They are Always ANGRY).
To fill my Shed time with something productive and because the Stormy weather was actually Sunshine (in Somerset) I felt I had to carry on. I decided to fit a new battery as the Battery I recently bought for the bike has a fault and is only giving me 4 of the needed 6V. I did some googling and found this interesting article from a fellow Matchless owner which talks about fitting 2x Hawker Cyclon 0809-0012 6V 5Ah batteries to the bike and wiring them either in series (12V) or parallel (6V) and that would give you 10Ah and fit in the Lucas battery box. Well, I don’t have a Lucas box so not much use to be so I opted for the 6V 8Ah version going on the assumption that I don’t really use the bike a lot and that battery would still fit and is quite compact.
There isn’t a fuse there at the moment and I think one of the next jobs will be to fit one. I am not worried about it taking up space there in the box because unless you carry a screwdriver in your pocket it isn’t easy to open.
The bikes Coil sits under the tank and often is in the way when we try to refit the tank so as I had the electrical bits out I thought I would see if I could move it to the airbox area or some other convenient spot.
Not too bad and it may change but just for now it works.
I told you it works. Some of you observant people will spot another little job, I used some lock wire and special lockwire pliers to lock the rocker cover nuts in place, they have a habit of vibrating loose. This will have to come off to adjust the pushrods at a later date. For now, it is just, starts it, warm up and let cool. The clear bit of pipe near the head of the engine is on an oil feed pipe and there so that we can keep an eye on the oil, which is fun as its a light green at the moment.
I haven’t done it to book as there is a technique which means that you tighten rather than loosen the bolts thanks to the tension applied by the wire.
Now to wait for the bits I ordered, including a posh Reg/Rectifier as I suspect the original device isn’t working as it should be.